Products

CM Alloy Shackles are designed with a 5:1 design factor and have a strength rating approximately 50% higher than a comparable-sized carbon shackle ...

Working Load Limit: 8,800 lbs Benefits & Features Clevlok® head designed for easy assembly “I” beam body design increases grip when removing f...

Working Load Limit: 8,800 lbs Benefits & Features  For use with both Grade 80 & 100 chain Meets ASTM A952 standards 100% proof tested Dura...

Working Load Limit: 8,800 lbs.  High-cycling, long-life spring 100% proof tested Meets ASTM A952 standards Durable orange powder coated finish Pos...

Working Load Limit: 8,800 lbs Benefits & Features For use with both Grade 80 & 100 chain Fatigue rated to Grade 100 specifications 100% p...

Working Load Limit: 8,800 lbs. Benefits & Features For use with both Grade 80 & 100 chain Throat opening to 4.5" (114 mm) Meets ASTM A952 ...

Working Load Limit: 8,800 lbs Benefits & Features Large eye design for use with chain, wire rope and synthetic material 100% proof tested Meet...

BENEFITS & FEATURES All components are forged, not cast Forged binders are lighter and stronger than cast binders Under equal force a forged h...

Working Load Limit - 8,800 lbs Benefits & Features Meets ASTM A973 & NACM standards 25% higher working load limit when compared to Grade 8...

Working Load Limit: 8,800 lbs Benefits & Features Used for overhead lifting slings to connect chain branches to  the master link and the hook ...

Working Load Limit: 8,800 lbs. Benefits & Features The eye easily positions to attach to the load 100% proof tested Meets ASTM A952 standards ...

Benefits & Features Meets the dimensional and finish requirements of FF-C-450 Drop forged saddle  Forged saddles include size,  USA and CM ...

Working Load Limit: 6,600 lbs Hook on each end Meets all Department of Transportation (D.O.T.) requirements and is required in most states by the ...

Working Load Limit: 6,600 lbs Hook on each end Meets all Department of Transportation (D.O.T.) requirements and is required in most states by the ...

Working Load Limit (tons) Vertical: 1.4 Choker: 1.1 Basket: 2.9

9,200 lbs WLL / 33,000 lbs minimum breaking strength Forged steel Heat treated Forged handle

Working Load Limit: 9,200 lbs End Fittings: Hook / Hook Handle is designed using a self-locking, open pawl allowing for easy removal of  unwanted ...

Ratchet load binders are used with ratchet chains to create tension in a tie-down assembly. Load binders are often used for load transport and othe...

- 3/16" galvanized steel cable lifeline- Double action load-indicating swivel snap hook.- Side-payout configuration for smooth lifeline operation.-...

Application For Vertical lifting, transporting and turning of all steel plates and structures. Jaw openings available from: 0 to 150 mm. TSE / ST...

Application For vertical lifting, transporting and turning of all steel plates and structures from all positions Jaw openings available from: 0 t...

Application For Vertical lifting, transporting and turning of all steel plates and structures. Jaw openings available from: 0 to 150 mm. TSE / ST...

Application For vertical lifting, transporting and turning of all steel plates and structures from all positions Jaw openings available from: 0 t...

Industrial tear-proof tarp

With reinforced corners

Industrial tear-proof tarp

Industrial tear-proof tarp

Industrial tear-proof tarp

With reinforced corners

Features High-strength, durable 5/8" double braid polyester rope lifeline with steel thimble and stitched end-termination Exclusive line tensioner...

Features 3/16" galvanized steel cable lifeline with load-indicating swivel snap hook Features glass-filled nylon housing for durable impact resist...

Features 7/32" galvanized steel cable lifeline with load-indicating swivel snap hook Internal inertial braking system with dual disc brakes provid...

Features 7/32" galvanized steel cable lifeline with load-indicating swivel snap hook Internal inertial braking system with dual disc brakes provid...

Features 3/16" galvanized steel cable lifeline with load-indicating swivel snap hook Side-payout configuration delivers smooth lifeline operation....

Features 20% lighter than typical 30' Cable Class 2 Leading Edge SRLs 7/32" galvanized steel cable lifeline with swivel snap hook Innovative energ...

Features Features 1-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistance Appropriately sized alloy steel D-rings provid...

Features SteelGrip Plus™ Cable HLL Assembly, no anchors 3/8" galvanized steel cable with one-end terminated and thimbled. Features 1 stainless ste...

Features Complete 30' Temporary Cable HLL system 3/8" galvanized steel cable with one-end terminated and thimbled. Includes 2 web pass-through sli...

Features SteelGrip® Cable HLL Assembly, no anchors 3/8" galvanized steel cable with one-end terminated and thimbled. Features 1 stainless steel co...

Features Complete 30' Single-span Temporary Cable HLL System Includes two I-beam stanchions with 4" to 18" clamping range. 3/8" galvanized steel c...

Features Complete 30' Single-span Temporary Cable HLL System Includes two I-beam stanchions with 4" to 24" clamping range. 3/8" galvanized steel c...

Features Complete 30' Temporary Cable HLL system 3/8" galvanized steel cable with one-end terminated and thimbled. Includes 2 web pass-through sli...

Features Features 11/16" solid-core nylon kernmantle rope with one sewn and thimbled end-termination Plated steel line tensioner features integrat...

Features Constructed with 5/8" low-stretch 3-strand twisted rope Premium polyester blend reduces kinking and hockling. Steel thimble and splice-pr...

Features Constructed with 5/8" low-stretch 3-strand twisted rope Premium polyester blend reduces kinking and hockling. Steel thimble and splice-pr...