Featured Products

Endless round slings offer a variety of lifting options for capacities ranging from 2600 lbs to 42,400 lbs. Larger capacities are available, as wel...

Eye and eye lifting straps offer a variety of lifting options for capacities ranging from 5120 lbs to 23,000 lbs. Smaller and larger capacities are...

Precast Dog Bone Lifting Eye/Clutch is used in lifting precast concrete panels along with a dog bone lifting anchor.

6 ft. single leg, non-stretch, internal shock absorbing lanyard, 3/4” hook. Meets or exceeds ANSI Z359.13-2013. Key Features ...

Grade 70 tie-down chain sold by the foot. NOT FOR OVERHEAD LIFTING

CM Industrial/Government-Rated Carbon Shackles are designed with a 6:1 design factor. Anchor shackles can be side loaded or used for multiple conne...

CM Alloy Shackles are designed with a 5:1 design factor and have a strength rating approximately 50% higher than a comparable-sized carbon shackle ...

Universal 5 pt. Adjustable Full Body Harness, Size: Universal, Blue Top, Black Heavy Duty Bottom, Pass-Through Chest Buckle, Grommet Leg Straps, Ba...

Grade 100 chain sold by the foot. For over-head lifting. 

Single leg wire rope bridle with thimble eyes on each end with sliding choker with latch WLL range from 2,600 lbs to 12,000 lbs

Contractor+ 3D Standard Non-belted Full Body Harness, Tongue Buckle Leg Adjustment Proprietary dorsal attachment sleeve supports effortless additi...

Single-leg grade 100 lifting chains with grab hooks on each end are great for over-head lifting and heavy duty tie-down. Grade 100 chain assemblies...

20’ retractable web, swivel top plastic housing, built in shock absorber, ¾” load indicator hook, ½” carabiner included. Blue housing. Min breaking...

4 – 6 ft. adjustable shock absorbing lanyard with 3/4” hook. Meets or exceeds ANSI Z359.13-2013. Key Features DESIGN: ...

Green Top, Black Heavy Duty Bottom with 5 point adjustment. Pass Through Chest, Grommet Legs, Back D-Rings, Sewn In Back Pad. SRL back plate. Meets...

5 point adjustment harness. Pass Through Chest, Tongue Buckle Legs, Hip D-Rings, Sewn In Back Pads. Fall Indicators. Multiple sizes. Meets or Excee...

Purple top, yellow bottom. Full body harness with 5 point adjustment, dorsal D-ring, grommet leg straps, Fall Indicators. Meets or Exceeds ANSI Z35...

Material: C1030 Heat Treat: Quench & Draw Finish: Plain or Black Oxidel Stainless Steel Available

WORKING LOAD LIMIT: 3/4 TO 22 TONS Benefits & Features Load rating marked on each hook body Design factor 5:1 Hook tips are pre-drilled to all...

WORKING LOAD LIMIT: 4,300 to 72,300 lbs Benefits & Features For use with both Grade 80 & 100 chain Throat opening up to 6 inches Quenched ...

The LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in ...

Harrington’s LX mini puller is lightweight, compact and built to perform. It fits conveniently in a toolbox and will easily handle pulling and movi...

Actek 1-1/4" x 1" Street Plate Hoist Ring, WLL: 10,000 lbs., PN# 38215  Coil Thread 200% Proof-Load Tested with Serial Number for Traceability 5:1...

6' Pass-Through Sling Anchor (PN 7372) Features 1-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistance Appropriately si...

Hand Chain Hoist - MA Series 1/2 Metric ton capacity  Increased efficiency by additional pinion shaft bearing and close tolerances ...

6' Web Mini SRD Twin-leg Steel SRD Connector+Alum Rebar Hooks (PN 72706TH5) Features internal locking pawls and ViewPack® external energy absorber...

6' SAL Y-Legs; ViewPack with Alum Rebar Hooks (PN 826073A) Heavy-duty 1" polyester web construction throughout Energy absorber features patented V...

Raise the bar on lightweight durability with our JLA Compact Lever Hoist. Available in 3/4-ton, 1-1/2–ton, and 3-ton models, this hoist delivers in...

8-strand high strength polyester/polypropylene blended mooring lines, dock rope, used for mooring larger vessels. OCIMF approved for use with oil t...

Single leg wire rope bridle with standard eyes on each end and sliding choker WLL range from 2,600 lbs to 12,000 lbs

8' Cable Pass-Through Sling Anchor, Coated Hard-wearing 1/4" vinyl coated galvanized steel cable tolerates demanding work environments Convenientl...

6' Cable Pass-Through Sling Anchor, Coated Hard-wearing 1/4" vinyl coated galvanized steel cable tolerates demanding work environments Convenientl...

Beam Anchor Trolley. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.1-2007. Key Features DESIGN: ...

18" Dorsal D-Ring Extender with Snap Hook (PN 8366) Provides improved over-the-shoulder reach for ease of connecting lanyards and SRLs Built with ...

5 to 1 Rescue Kit complete with 150 feet of rope included. With a heavy duty waterproof bag for storage. The kit includes an integral braking...

Confined Space Winch bracket for approved winch. Key Features DESIGN: Universal mounting bracket for w...

Confined Space Winch, galvanized cable, 3/4” hook. Max load 300 lbs. Personnel or material. Meets or Exceeds ANSI Z359.1-1992, ANSI Z117. 1-1...

Self retractable Lifeline Retrieval System with rescue for tripod. Galvanized cable, 3/4” load indicator hook, 1/2” carabiner. Blue housing. ...

Confined Space Tripod bracket for SRL1211412. Key Features DESIGN: Universal mounting bracket is desig...

Confined Space Tripod – 7ft. Max load 1100 lbs. Adjustable height 4.3 ft. – 7 ft. Meets or exceeds ANSI Z359.1-2007, ANSI Z359.4-2013. ...

Trauma Strap step up relief pack. Key Features DESIGN: 0.79 in. polyester webbing Formed pouch. Textil...

Rebar chain positioning device, one 2-1/4” swivel rebar hook on top and two 3/4” snap hooks on opposite ends. Meets or exceeds ANSI Z359.3-20...

4 – 6 ft. Adjustable restraint lanyard. Meets or exceeds ANSI Z359.3-2007. Key Features DESIGN: Design...

18 in. 1-3/4” web single leg D-ring extender, loop on one end and large D-ring on opposite end. Meets or Exceeds ANSI Z359.1-2007. ...

18 in. D-ring extender, 3/4” snap hook on one end and large D-ring on opposite end. Meets or Exceeds ANSI Z359.1-2007. Key Featur...

I-beam Trolley adjustable 3.54” to 11.41” made of Aluminum and Stainless Steel. Meets or Exceeds ANSI Z359.1-2007. Key Features ...